G5 L4-2.2L (2007)
Note: Ecotec 4 cylinder engines with SIDI-Direct Injection, the lower timing chain crank gear may be equipped with a second spacing washer
installed in front of the lower timing chain crank gear. The outer spacer/washer is in between the crank/balancer pulley and the lower timing gear
and may remain in place when the pulley is removed. The spacer/washer has a dot/mark on its surface that may be mistaken for the lower timing
mark. If applicable, the washer must be removed in order to view the correct timing mark on the lower crank gear.
18. Remove the outer friction washer (1) if equipped.
19. Ensure the crankshaft gear timing mark (2) is in the 5 o'clock position and crankshaft key is in the 12 o'clock position.
20. Remove the crankshaft sprocket (3).
21. Remove the inner friction washer (1).
22. Remove the oil nozzle and bolt.
