G5 L4-2.2L (2007)
17. Install the exhaust manifold heat shield (1).
18. Install the exhaust manifold heat shield studs (2).
Tighten the studs to 22 N.m (16 lb ft).
19. If equipped with RPO NU3, position the AIR hose/pipe and install the bracket onto the heat shield stud.
20. Position the AIR outlet hose/pipe bracket to the cylinder head.
21. Install the AIR outlet hose/pipe bracket bolt.
Tighten the bolt to 20 N.m (15 lb ft).