G5 L4-2.2L (2007)
Heater Hose: Service and Repair
Heater Hose Replacement - Outlet (With RPO Codes L61, LE5)
Heater Hose Replacement - Outlet (RPOs L61, LE5)
Tools Required
J38185 Hose Clamp Pliers
Caution: With a pressurized cooling system, the coolant temperature in the radiator can be considerably higher than the boiling point of the
solution at atmospheric pressure. Removal of the surge tank cap, while the cooling system is hot and under high pressure, causes the solution to
boil instantaneously with explosive force. This will cause the solution to spew out over the engine, the fenders, and the person removing the cap.
Serious bodily injury may result.
Removal Procedure
1. Remove the surge tank cap.
2. Place a drain pan under the heater hoses near the front of the dash.
3. Remove the dash panel exterior sound barrier.
4. Reposition the heater outlet hose clamp at the heater core using J38185.
5. Remove the heater outlet hose from the heater core.
