G5 L4-2.2L (2007)
1. Replace the drain tube seal.
2. Replace the front of dash seal.
3. Inspect and replace the HVAC module seals if damaged:
*
The defrost duct seal
*
The HVAC module to cross car duct seal
*
The center air outlet duct seal
*
The center floor air outlet duct seal
*
The air inlet seal
4. Place the HVAC module in the vehicle. Align the HVAC module drain tube and front of dash studs to the vehicle.
Notice: Refer to Fastener Notice.
5. Install the HVAC module nuts to the front of dash.
Tighten the nuts to 10 N.m (89 lb in).