G5 L4-2.2L (2007)
Turn Signal Switch: Service and Repair
Turn Signal Multifunction Switch Replacement
Removal Procedure
1. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement.
2. Disconnect the multifunction turn signal switch harness connector.
3. Depress the locking tabs and remove the multifunction turn signal switch from the steering column.
Installation Procedure
1. Install the multifunction turn signal switch to the steering column. Ensure the locking tabs are snapped into place.
2. Connect the multifunction turn signal switch harness connector.
3. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement.
