G5 L4-2.2L (2007)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement (RPO NU6)
Fuel Level Sensor Replacement (RPO NU6)
Tools Required
J 39765 Fuel Sender Lock Nut Wrench
Removal Procedure
Caution: Refer to Gasoline/Gasoline Vapors Caution.
Caution: In order to reduce the risk of fire and personal injury that may result from a fuel leak, always replace the fuel sender gasket when
reinstalling the fuel sender assembly.
1. Remove the fuel tank.
2. Using the J 39765, unlock the fuel sender lock ring.
3. Slowly lift the fuel pump flange up until the quick connect fittings (1) and fuel level sensor electrical connector are just visible.
4. Disconnect the fuel level sensor electrical connector from the fuel pump flange.
5. Disconnect the fuel tank vent valve and the fuel filter quick connect fittings (1) from the fuel pump flange.
