G5 L4-2.2L (2007)
4. IMPORTANT: Apply the mylar tape with the aluminum side inward. This ensures good electrical contact with the drain wire.
Re-assemble the cable.
-
Rewrap the conductors with the mylar tape.
-
Use caution not to wrap the drain wire in the tape (1).
-
Follow the splicing instructions for copper wire and splice the drain wire.
-
Wrap the drain wire around the conductors and tape with mylar tape.
5. Tape over the entire cable. Use a winding motion when you apply the tape.
Seat Belt Schematic Icons
Seat Belt Schematic Icons
Secondary/Configurable Control Schematic Icons
Secondary/Configurable Control Schematic Icons
