G5 L4-2.2L (2007)
Brake Light Switch: Adjustments
STOP LAMP SWITCH ADJUSTMENT
1. Remove the accelerator pedal retaining nuts. Move the pedal aside.
2. NOTE: Proper stoplamp switch adjustment is essential. Improper stoplamp switch adjustment may cause brake drag, heat buildup and excessive
brake lining wear.
With the brake pedal fully released, insert the stop lamp switch into the brake pedal bracket until the switch plunge is fully depressed into the
barrel.
3. Twist the switch clockwise until the travel stop has been reached.
4. The plunger should extend out of the barrel (1) of the switch approximately 1.0 mm (0.04 in).
