G5 L4-2.2L (2007)
14. Install the actuator (11) into the pocket in the front face of the cylinder plug.
15. Install the security plate (10) on top of the cylinder plug in the cylinder sleeve assembly.
Notice: Refer to Fastener Notice.
16. Securely stake the security plate (10) into the cylinder sleeve assembly (4) by using the appropriate staking tool BO-47869. Assemble the cylinder
sleeve assembly, security plate, and staking tool BO-47869. When loading cylinder sleeve assembly into the staking tool, ensure staking cup
number 12 is positioned cup toward cylinder sleeve. Secure assembled staking tool in a vise. Rotate the forcing screw (13) in order to uniformly
stake the cylinder sleeve material over the security plate.
Tighten the forcing screw (13) to 23-28 N.m (17-21 lb ft). Once the security plate has been staked to the assembly, ensure the actuator (11)
can rotate freely inside the assembly by inserting a key and removing it.
