pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Steering Mounted Controls Assembly > < Steering Gear|Service and Repair|Page 13489
Page 4
background image

6. Install the outer tie rods to the steering knuckles.
7. Install new outer tie rod nuts.

Tighten the bolts to 25 N.m (18 lb ft) plus 90 degrees.

8. Install the front wheels. Refer to Tire and Wheel Removal and Installation (4 Lug Wheel) Tire and Wheel Removal and Installation (5 Lug

Wheel).

9. Lower the vehicle.

10. Remove the strap from the steering wheel.
11. Adjust the toe if necessary. Refer to Front Toe Adjustment. 

Steering Mounted Controls Assembly > < Steering Gear|Service and Repair|Page 13489