G5 L4-2.2L (2007)
14. Align the left side axle bracket and snug down the bolts.
15. Align the right side axle bracket and snug down the bolts.
16. Tighten all the bracket to body bolts.
Tighten the bolts to 90 N.m (66 lb ft) +30 degrees.
17. With the axle supported by the jack stands, remove the lower shock bolts.
18. Lower the jacks in order to install the coil springs.
19. Install the coil springs, making sure the colored tag is facing the rear of the vehicle.
20. Raise the jacks until the springs are slightly compressed in order to install the lower shock bolts. Refer to Shock Absorber Replacement.
Tighten the lower bolts to 110 N.m (81 lb ft).
21. Remove the jack stands.
22. Reposition the rear brake hose brackets to the body.
23. Install the brake hose bracket attaching nuts.
24. Install the rear wheels. Refer to Tire and Wheel Removal and Installation (4 Lug Wheel) Tire and Wheel Removal and Installation (5 Lug Wheel).
25. Lower the vehicle.
