G5 L4-2.2L (2007)
5. Remove the strut lower bolts, nuts and antilock brake system (ABS) wiring bracket, if equipped.
6. Remove the strut.
Installation Procedure
1. Install the strut.
Notice: Refer to Fastener Notice.
2. Install the strut upper mounting nuts.
Tighten the nuts to 20 N.m (15 lb ft).
Important: This is a prevailing torque type fastener. This fastener may be reused ONLY if:
^
The fastener and its counterpart are clean and free from rust.
^
The fastener develops 3 N.m (27 lb in) of torque/drag against its counterpart prior to the fastener seating.
If the fastener does not meet these criteria, REPLACE the fastener.
