G5 L4-2.2L (2007)
Install the strut lower bolts, nuts and ABS wiring bracket, if equipped.
Tighten the strut lower nuts to 120 N.m (89 lb ft).
3. Connect the stabilizer shaft link to the strut assembly.
Tighten the stabilizer shaft link nut to 65 N.m (48 lb ft).
4. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (4 Lug Wheel) Tire and Wheel Removal and Installation (5 Lug
Wheel).
5. Lower the vehicle.
6. Align the front wheels. Refer to Measuring Wheel Alignment.
Strut, Strut Component and/or Spring Replacement
Strut, Strut Component and/or Spring Replacement
Tools Required
J45400 Strut Spring Compressor
Disassembly Procedure
1. Remove the strut from the vehicle. Refer to Strut Assembly Replacement.
2. Install the strut (2) in the J 45400 (1).
Important: The spring is compressed when the strut moves freely.
3. Turn the spring compressor forcing screw until the coil spring is compressed.
4. Loosen the compressor forcing screw until the upper strut mount and coil spring may be removed.
