G5 L4-2.2L (2007)
Pressure Plate: Service and Repair
Clutch Drive Plate and Clutch Driven Plate (M86)
Clutch Drive Plate and Clutch Driven Plate (M86)
Tools Required
J43482 Clutch Alignment Arbor
Removal Procedure
1. Remove the transmission. Refer to Transmission Replacement for the - M86/M94 Getrag transaxle.
2. Remove the clutch cover bolts one turn at a time, until spring pressure is relieved.
3. Remove the clutch cover and the clutch disc.
Installation Procedure
1. Align the machined side of the flywheel assembly, with the machined side of the cover.