G5 L4-2.2L (2007)
9. Connect the shift cable ends (1) to the transmission shift levers as noted during disassembly.
10. Connect the shift cable to the shift control assembly as noted during disassembly.
Important: Care must be taken when releasing the 4th gear locking tab. The shifter ring must be pulled upwards to allow 4th gear
locking tab to fully release. Excessive clamping force may damage plastic shift control assembly components.
11. Release the shift control assembly 4th gear locking tab. Pull up on the shifter ring, install locking pliers as shown and rotate the pliers upward to
compress the tabs and release the 4th gear locking tab.
