G6 L4-2.4L (2007)
14. Install both stabilizer links to the stabilizer bar.
Tighten the stabilizer link nut to 65 N.m (48 lb ft) plus 180 degrees rotation.
15. Install the tie rod ends to the steering knuckles.
16. Install the lower ball joints to the steering knuckles.
Tighten the ball stud to steering knuckle pinch nut to 50 N.m (37 lb ft). Reverse the nut 3/4 of a turn. Tighten to 50 N.m (37 lb ft) plus 60
degrees.
17. Connect the ABS sensor to the wheel speed sensor and frame.
18. Install the front fender liner.
19. Install the tire and wheel assemblies.
20. Remove the engine support fixture.
21. Bleed the power steering system. Refer to Power Steering System Bleeding.
