G6 L4-2.4L (2007)
SUNROOF WINDOW REPLACEMENT - MIDDLE
REMOVAL PROCEDURE
1. Open the sunshade to the full rearward position.
2. Cycle the sunroof window to the fully closed position.
3. IMPORTANT: Do NOT fully remove actuator side covers (1). The sunroof window actuator cover conceals the window actuator screws. Use
care when lifting up on the corners of the sunroof window actuator side covers to expose the screws.
From inside the vehicle, gently pull back the actuator covers and remove the sunroof window screws from left and right sides.
4. IMPORTANT: Use Care NOT to scratch the roof surface or the sunroof window.
Lift the sunroof window (2 or 3) from the sunroof opening.
5. Remove the actuator cover from the sunroof.
