G6 L4-2.4L (2007)
1. Install the brake caliper mounting bracket to the steering knuckle.
2. Install the brake caliper mounting bracket bolts (1).
Tighten the bolts to 130 N.m (96 lb ft).
3. Apply a very thin coating of high temperature silicone brake lubricant to the pad hardware mating surfaces (1) of the caliper bracket only.
4. Clean the brake pad mating surfaces of the brake pad retainers (2).
5. Install the brake pad retainers (2) to the brake caliper bracket.
Important: The wear sensor equipped disc brake pad must be mounted inboard of the rotor with the leading edge of the sensor facing the
