G6 L4-2.4L (2007)
28467-2A radiator shelf tube. The hole used in the J 28467-4A front support assembly depends on the vehicle application.
20. Install the J 28467-7A lift hook through the J 28467-6A lift hook bracket.
21. Install the 1/2 inch lift hook washer and J 28467-34 lift hook wing nut onto the J 28467-7A lift hook.
22. Install the J 28467-6A assemblage lift hook bracket over the J 28467-2A radiator shelf tube.
23. Adjust the J 28467-2A radiator shelf tube and the J 28467-6A assemblage lift hook bracket in order to align the hook with the right (rear), front of
engine, lift hook bracket located next to the generator.
24. Hand tighten the J 28467-1A passenger side cross bracket assembly wing nuts.
25. Hand tighten the J 28467-34 lift hook wing nuts securely to remove all slack from the engine support fixture assembly.
