G6 L4-2.4L (2007)
Notice: Refer to Fastener Notice .
8. Tighten the transmission mount bracket to transmission bolts using the following sequence:
1. Rear bolt
2. Middle bolt
3. Front bolt
Tighten the bolts to 50 N.m (37 lb ft).
9. Tighten the engine mount bracket nuts.
Tighten the nuts to 50 N.m (37 lb ft).
10. Remove the floor jacks.
11. Rock the powertrain vigorously from front to rear and allow the powertrain to settle.
