G6 L4-2.4L (2007)
2. Install the recirculation door actuator.
Notice: Refer to Fastener Notice.
3. Tighten the recirculation door actuator screws.
Tighten the screws to 1.5 N.m (13 lb in).
4. If equipped, install the OnStar module bracket. Refer to OnStar Module Bracket Assembly Replacement.
5. If equipped, install the communication interface module. Refer to Communication Interface Module Replacement.
6. Install the right closeout panel.
7. Install the fuse labeled HVAC CTRL (BATT).
8. Calibrate the actuator. Refer to Actuators Recalibration. See: Testing and Inspection/Programming and Relearning