G6 L4-2.4L (2007)
8. Remove the fuel sender assembly (2) from the fuel tank.
Installation Procedure
1. Install a NEW O-ring seal (3) onto the fuel sender.
2. Install the fuel sender assembly (2) into the fuel tank far enough to connect the vapor line quick connect fitting on the underside of the sender
cover.
3. Connect the vapor line quick connect fitting (1).
4. Align the cover "paddle" or anti-rotation feature with the corresponding feature in the top of the fuel tank.
5. Slowly apply pressure to the top of the spring loaded sender cover until the sender aligns flush with the surface of the tank.