G6 L4-2.4L (2007)
10. Lower the vehicle.
11. Remove the caps or plugs from the EVAP pipe and the purge solenoid.
12. Install the EVAP pipe to the retainers (2, 3) and close the retainers.
13. Install the EVAP pipe to the upper retainer (1) and close the retainer.
14. Connect the EVAP pipe (2) quick connect fitting to the purge solenoid.
15. Connect the negative battery cable.
16. Inspect for fuel leaks using the following procedure:
1. Turn ON the ignition, with the engine OFF for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition, with the engine OFF.
4. Inspect for fuel leaks.
17. Install the intake manifold cover.
