G6 L4-2.4L (2007)
6. Remove the clutch pedal mounting bolt (3).
7. Remove the clutch pedal mounting nuts (2).
8. Remove the clutch pedal (1).
Installation Procedure
1. Install the clutch pedal (1)
2. Install the clutch pedal mounting nuts (2). HAND TIGHTEN ONLY.
Notice: Refer to Fastener Notice.
3. Install the clutch pedal mounting bolt (3).
^
Tighten the nuts to 23 N.m (17 lb ft).
^
Tighten the bolt to 23 N.m (17 lb ft).
4. Connect the clutch position sensor electrical connector.