pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Recall - Occupant Crash Protection Non-Compliance|Page 15347 > < Recall - Occupant Crash Protection Non-Compliance|Page 15345
Page 1
background image

Air Bag Control Module: Service and Repair

Inflatable Restraint Sensing and Diagnostic Module Replacement

Removal Procedure

Caution:  Do not strike or jolt the inflatable restraint sensing and diagnostic module (SDM). Before applying power to the SDM, make
sure that it is securely fastened with the arrow facing toward the front of the vehicle. Failure to observe the correct installation procedure
could cause SIR deployment, personal injury, or unnecessary SIR system repairs.

1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the console.
3. Remove the automatic transmission shift control, if equipped.
4. Remove the park brake lever assembly.
5. Remove the inflatable restraint sensing and diagnostic module nuts.
6. Remove the inflatable restraint sensing and diagnostic module wire harness connector.

7. Remove the inflatable restraint sensing and diagnostic module.

Installation Procedure

Recall - Occupant Crash Protection Non-Compliance|Page 15347 > < Recall - Occupant Crash Protection Non-Compliance|Page 15345