G6 L4-2.4L (2007)
Seat Belt Guide Track: Service and Repair
Shoulder Belt Guide Adjuster Replacement - Front
Removal Procedure
1. Open the seat belt guide loop cover.
2. Remove the guide loop nut.
3. Remove the guide loop from the guide adjuster bracket.
4. Remove the center pillar upper trim panel.
5. Remove the shoulder belt guide adjuster bracket bolts.
6. Remove the shoulder belt guide adjuster bracket from the center pillar.
Installation Procedure
Important: Verify that the release lever at the top of the bracket is in the full up position.
1. Position shoulder belt guide adjuster bracket to the center pillar.
Notice: Refer to Fastener Notice.
2. Install the shoulder belt guide belt adjuster bracket bolts.
Tighten the shoulder belt guide adjuster bracket bolts to 35 N.m (25 lb ft).
3. Install the upper center pillar trim panel.
4. Install the guide loop to the guide adjuster bracket.
5. Install the guide loop nut.