G6 L4-2.4L (2007)
1. Install the MAF/IAT sensor.
Notice: Refer to Fastener Notice.
2. Using a tamper proof TORX(R), install the MAF/IAT sensor screws.
Tighten the screws to 0.6 N.m (5 lb in).
3. Connect the MAF/IAT sensor electrical connector.
1. Install the MAF/IAT sensor.
Notice: Refer to Fastener Notice.
2. Using a tamper proof TORX(R), install the MAF/IAT sensor screws.
Tighten the screws to 0.6 N.m (5 lb in).
3. Connect the MAF/IAT sensor electrical connector.