G6 L4-2.4L (2007)
4. Adjust the camber to specification by moving the top of the wheel in or out. Refer to Wheel Alignment Specifications.
Notice: Refer to Fastener Notice.
5. Install the strut to knuckle nuts.
Tighten the nuts to 120 N.m (89 lb ft).
6. Re-calibrate the steering wheel position sensor. Refer to Control Module References
Front Toe Adjustment
Front Toe Adjustment
1. Ensure that the steering wheel is set in a straight ahead position.
2. Loosen the tie rod jam nut (5).
3. Adjust the toe to specification by turning the adjuster (6). Refer to Wheel Alignment Specifications.
Notice: Refer to Fastener Notice.
4. Tighten the tie rod jam nut (5).
Tighten the tie rod jam nut (5) to 68 N.m (50 lb ft).