G6 L4-2.4L (2007)
Stabilizer Link: Service and Repair
Stabilizer Shaft Link Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the front tire and wheel assembly.
3. Disconnect the stabilizer link from the stabilizer shaft.
4. Disconnect the stabilizer link from the strut assembly and remove from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice.
1. Connect the stabilizer link to the strut assembly.
Tighten the stabilizer link nut to 65 N.m (48 lb ft).
2. Connect the stabilizer link to the stabilizer shaft.
Tighten the stabilizer link nut to 65 N.m (48 lb ft).
3. Install the front tire and wheel assembly.
4. Lower the vehicle.