G6 L4-2.4L (2007)
8. Firmly align the lower spring coil in the spring seat pocket.
9. Place the upper spring insulator and spring seat onto the top of the coil spring.
10. Place the bearing and strut mount on the top of the spring seat.
Notice: Refer to Fastener Notice.
11. Install the upper strut shaft nut.
Tighten the nut to 70 N.m (52 lb ft).
12. Using the J 45400, remove the spring tension.
13. Remove the strut assembly from the J 45400.
14. Install the strut assembly.