G6 L4-2.4L (2007)
Parking Lock Cable: Service and Repair
6T70/6T75 - Automatic Transmission
Park Lock Cable Replacement
Removal Procedure
1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling.
2. Remove the console.
3. Place the transaxle shift control lever in the PARK position.
4. Turn the ignition key to the RUN position.
Remove the park lock cable end (2) from the park lock lever by sliding the cable end reward off the park lock lever pin.
5. Release the park lock cable retainer (1) from the shift control base.
6. Remove the knee bolster.
