G6 L4-2.4L (2007)
Shift Cable: Service and Repair
4T45-E - Automatic Transaxle
Floor Shift Control Cable Replacement
Removal Procedure
1. Set the park brake and chock the wheels.
2. Disconnect the transaxle shift control cable terminal (1) from the transaxle manual shift lever pin (5).
3. Remove the retainer (2) from the transaxle shift control cable.
4. Press the locking tabs inward in order to release the transaxle shift control cable (3) from the cable bracket (4).
5. Remove the console.
6. Disconnect the transaxle shift control cable terminal (1) from the shift lever pin.
7. Release the transaxle shift control cable retainer (2) and remove the transaxle range selector cable from the transaxle control lever base.
