G6 L4-2.4L (2007)
1. With the clutch fluid reservoir connection at 2 o'clock position, insert the clutch master cylinder (2) into the cowl (1).
2. Align the keys (2) of the clutch master cylinder housing with the tabs (1) on the cowl.
3. Rotate the clutch master cylinder (2) counter clockwise approximately 1/8 turn until fully seated. The clutch fluid reservoir hose connection will
be at vertical 12 o'clock position when the clutch master cylinder is properly installed.
4. Connect the clutch hydraulic hose (3).
5. Install the air cleaner outlet duct.