G6 L4-2.4L VIN B (2006)
Pedal Positioning Motor: Service and Repair
ADJUSTABLE ACCELERATOR PEDAL MOTOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the adjustable accelerator pedal bracket assembly from the vehicle.
2. Remove the 3 motor assembly screws and remove the motor assembly from the adjustable accelerator bracket.
INSTALLATION PROCEDURE
1. Install the motor assembly to the adjustable accelerator bracket assembly.
2. Install the 3 screws to the adjustable accelerator bracket assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 2 N.m (18 lb in).