G6 L4-2.4L VIN B (2006)
Garnish Molding Replacement - Center Pillar Upper
Removal Procedure
1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling Zone 8 in Restraint Systems.
2. Lower the seat belt D-ring adjuster.
3. Remove the fastener from the D-ring.
4. Remove the D-ring.
5. Starting at the top, remove the garnish molding by pulling forward.
Installation Procedure
1. Starting at the bottom, install the garnish molding to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
