G6 L4-2.4L VIN B (2006)
Convertible Top Motor: Removal and Replacement
Folding Top Pump with Motor Replacement
Removal Procedure
Caution:
-
Refer to Eye Protection Caution in Service Precautions.
-
Refer to Folding Top Hydraulic Pressure Caution in Service Precautions.
-
Refer to Servicing Electrical Components Caution in Service Precautions.
1. Place the folding top in the up position.
2. Open the rear compartment.
3. Disconnect the battery.
4. Place a protective covering over the rear compartment interior and the adjacent body panels.
5. Remove the right side compartment trim.
6. Support the rear compartment lid.
7. Disconnect the sunroof solenoid harness.
8. Turn the hydraulic pump bypass valve (1) counterclockwise until the valve stops.
9. Remove the push-in-pins that attach the control module to the pump bracket.
10. Remove the electrical connectors from the pump bracket and control module Sunroof Module Assembly Replacement (CF5) Sunroof Module
Assembly Replacement (C3Y).
11. Remove the nuts (2) that attach the pump to the floor pan.
