G6 L4-2.4L VIN B (2006)
11. Install the push-in-pins that attach the control module to the pump bracket.
12. Add fluid as needed. Refer to PSD SIE TITLE Error: SIE linked to empty Cell ID 126674.
13. Install the reservoir filler plug (1).
14. Install the side compartment trim.
15. Remove the protective covering.
16. Turn the pump bypass valve (1) clockwise until the valve stops.
17. Connect the battery.
18. Remove the rear compartment lid support.
19. Bleed the hydraulic system. Refer to Folding Top Hydraulic System Bleeding Procedure.
20. Inspect the hydraulic system for fluid leaks.
21. Inspect the hydraulic system fluid level and add fluid as needed.
22. Close the rear compartment.
23. Inspect the folding top for proper operation.
