G6 L4-2.4L VIN B (2006)
17. It is always desirable to have the front edge lower than the rear edge of the window panel in font of it to create a slight shingle effect - it should be
almost undetectable.
18. On extreme cases, where adjustment of the first sunroof window panel will not compensate for the puckers (1) in the seal, It will be necessary to
correct the puckers.
19. Open the sunroof window panels.
20. Using a suitable tool (1), work the seal (2) by pulling it tight to fit the front corners. This will lessen the pucker.