G6 L4-2.4L VIN B (2006)
Sunroof Window Seal Replacement (C3Y)
Sunroof Window Seal Replacement (C3Y)
Removal Procedure
1. Open the sunshade.
2. Remove the sunroof window from the front.
3. Remove the 2nd and 3rd sunroof window.
4. Remove the sunroof window from the rear.
5. Cycle the sunroof to the full open position.
Important: Do this from outside the vehicle.
6. Remove the seal from the window panel frame by pulling the seal away at one point and continuing around the perimeter of the frame.
7. Wipe the perimeter of the frame area with a clean, dampened cloth using window cleaner GM P/N 1050427 (Canadian P/N 992727) or equivalent
in order to clean the surface of the perimeter.
Allow to air dry.
Installation Procedure
1. If reusing the old sunroof window seal, use a clean dampened cloth, wipe the seal with a small amount window cleaner GM P/N 1050427
(Canadian P/N 992727) or equivalent to installation.
