G6 L4-2.4L VIN B (2006)
3. Install the seat cushion cover and pad onto the seat frame.
4. If the vehicle is equipped with a heated seat, connect the heated seat wiring connector.
5. Install the J-strips to the seat frame. Start at the front end and work toward the rear.
6. Install the J-strip to the recliner rod.
7. Install the rear retainers for the seat cushion cover onto the seat frame.
8. Install the seat belt buckle to the seat.
9. Install the front seat.
10. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is
removed. Refer to Passenger Presence System Programming and Setup.
CAUTION: To avoid personal injuries, re-zero the passenger presence system whenever you remove or replace the seat cushion or trim.
Failure to do so may cause the system to malfunction.
Seat Cushion Cover and Pad Replacement - Rear (Convertible)
