G6 L4-2.4L VIN B (2006)
Clean the panel with alcohol and install two pieces of BRS Tape (flocking tap) to the bottom side on the tonneau panel.
Condition 7
Rear wheel well area metal creaking noise over bumps (either side of vehicle).
Cause 7
The metal bracket may be making contact with the shock.
Correction 7
PROCEDURE FOR VEHICLE BUILT PRIOR TO 01/02/2007
Remove the trunk trim to gain access to the area and adjust the metal away from the shock.
Condition 8
Noise from rear trunk area over bumps.
Cause 8
The cylinder for the stowage compartment lid may be rattling.
Correction 8
Remove the upper attachment pin and install a washer.
