G6 L4-2.4L VIN B (2006)
4. Lubricate the new seals and the reservoir bayonets with new Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667) or equivalent
DOT-3 brake fluid.
5. Install the seals, making sure they are fully seated.
6. Install the reservoir onto the master cylinder by pressing straight down by hand until pin holes are aligned.
7. Carefully tap in the reservoir retaining pins to secure the reservoir.
8. Fill the master cylinder reservoir.
9. Install the brake fluid level sensor.
10. Remove the master cylinder from the vise.
11. Install the master cylinder to the vehicle.