G6 L4-2.4L VIN B (2006)
Coolant Reservoir: Service and Repair
Surge Tank Replacement
Surge Tank Replacement
Tools Required
^
J38185 Hose Clamp Pliers
Removal Procedure
1. Drain the coolant. Refer to Draining and Filling Cooling System.
2. Reposition the surge tank inlet hose clamp at the surge tank using the J38185.
3. Remove the surge tank inlet hose from the surge tank.
4. Flex the surge tank mounting tabs outward to release the surge tank from the bracket.
5. Disconnect the coolant level sensor wire harness connector.