G6 L4-2.4L VIN B (2006)
7.
Remove the flywheel holder (J 43442), if required.
8.
Install the flywheel inspection cover and the inspection cover bolt.
Tighten
Tighten the bolts to 10 Nm (89 lb-in).
9.
Lower the vehicle.
Tools Required
J 37096 Flywheel Holder
Important:
If the J 37096 tool is not available, use a pry bar to hold the flywheel in place. A second technician will be required to perform Step 6 if the J
37096 tool is not available.
Harmonic Balancer Bolt Torque Procedure
1.
Raise and support the vehicle.
