G6 L4-2.4L VIN B (2006)
Control Assembly: Service and Repair
HVAC System - Automatic
HVAC CONTROL MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the instrument panel (I/P) center trim panel.
2. Remove the HVAC control module screws.
3. Remove the HVAC control module.
4. Remove the HVAC control module wire harness connectors.
INSTALLATION PROCEDURE
1. Install the HVAC control module wire harness connectors.
IMPORTANT: The key should be in the OFF position when connecting the electrical connectors to ensure proper calibration.
2. Install the HVAC control module.
