G6 L4-2.4L VIN B (2006)
^
Thickness variation in excess of the maximum allowable specification
^
Excessive corrosion/rust and/or pitting
^
Cracks and/or heat spots
^
Scoring of the disc brake rotor surface in excess of the maximum allowable specification
2.
Refinish the front rotors. Refer to Brake Rotor Refinishing in SI.
3.
Road test the vehicle and burnish the new front brake pads. Refer to Burnishing Pads and Rotors in SI.
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer
