G6 L4-2.4L VIN B (2006)
Drive Belt: Service and Repair
Removal Procedure
1. Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement See: Diagrams/Connector Views/Engine Control
Module/Engine Control Module (ECM) C3.
2. Remove the right front fender liner. Refer to Front Fender Liner Replacement See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair.
3. Install the J 44811 to the drive belt tensioner.
4. Using the J 44811 , rotate the tensioner counterclockwise in order to release the tensioner from the drive belt.
5. Remove the drive belt.
6. Slowly rotate the J 44811 and the tensioner clockwise in order to allow the tensioner to rest.
7. Remove the J 44811 from the drive belt tensioner.
Installation Procedure
