G6 L4-2.4L VIN B (2006)
12. Install the suction hose and liquid line to the TXV.
13. Install the suction hose and liquid line nut to the TXV.
Tighten the nut to 20 N.m (15 lb ft).
14. Install the liquid line to the dash clip.
15. Install the suction hose to the dash clip.
16. Install the air cleaner assembly.
17. Install the liquid line bracket bolt.
Tighten the bolt to 10 N.m (89 lb in).
18. Install the refrigerant pressure sensor.
Tighten the bolt to 5 N.m (44 lb in).
19. Install the refrigerant pressure sensor wire harness connector.
20. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging.
21. Leak test the fittings using the J 39400-A.
22. Install the surge tank to the surge tank bracket.
