G6 L4-2.4L VIN B (2006)
Fuel Supply Line: Service and Repair
FUEL HOSE/PIPES REPLACEMENT - CHASSIS
REMOVAL PROCEDURE
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
2. Disconnect the fuel feed pipe from the fuel rail.
3. Cap or plug the fuel feed pipe and the fuel rail to in order to system prevent contamination.
4. Raise and support the vehicle. Refer to Vehicle Lifting.
5. Disconnect the fuel feed pipe quick connect fitting at the fuel tank.
6. Remove the rear brake pipe bracket nuts and release the brackets from the body studs.
7. Release the pipe retainers from the vehicle underbody.
8. Remove the fuel feed pipe from the pipe retainers.
9. Lower the rear of the pipe while moving the pipe rearward slightly, then lower the front of the pipe.
10. Remove the fuel feed pipe from the vehicle.
INSTALLATION PROCEDURE
