G6 L4-2.4L VIN B (2006)
3. Connect the vapor line quick connect fitting (1).
4. Align the cover "paddle" or anti-rotation feature with the corresponding feature in the top of the fuel tank.
5. Slowly apply pressure to the top of the spring loaded sender cover until the sender aligns flush with the surface of the tank.
6. Use the J 45722 in order to install the fuel sender lock ring. Turn the fuel sender lock ring in a clockwise direction.
IMPORTANT: Always replace the fuel sender seal when installing the fuel sender assembly. Replace the lock ring if necessary. DO NOT apply any
type of lubrication in the seal groove.
Ensure the lock ring is installed with the correct side facing upward. A correctly installed lock ring will only turn in a clockwise direction.
7. Turn the lock ring until the ring seats on the second detent.
